DEEP WELL MULTISTAGE PUMPS
ONLY FOR WELLS
6LRS-LRX-LRD
8LRS-LRX-LRD
6LRS-LRX-LRD
LRS-LRX-LRD
SUBMERSIBLE MULTISTAGE CENTRIFUGAL PUMPS FOR 6” AND 8” WELLS
Submersible multistage centrifugal pumps for 6” and 8” wells. Check valve built into the delivery outlet. Pump flanges for coupling with motors are made according to NEMA standards. Most common applications are civil and agricultural. All components are made of stainless steel with lost wax Microfusion technology. The standard material is AISI 304 stainless steel, alternatively the following materials are available on request: AISI 316 Steel, Duplex steel, AISI 904L Steel. Bushing bearings and wear-rings made of sand abrasion-resistant rubber, reverse-Thrust ring in PTFE/ Graphite.
CONSTRUCTION FEATURES
MOTOR
Suction and delivery outlet
stainless steel AISI 304 (LRS)
stainless steel AISI 316 (LRX)
Duplex (LRD)
MOTOR
Valve
stainless steel AISI 304 (LRS-LMS) stainless steel AISI 316 (LRX-LMX) Duplex (LRD-LMD)
MOTOR
Impellers and
diffusers
stainless steel AISI 304 (LRS-LMS) stainless steel AISI 316 (LRX-LMX) Duplex (LRD-LMD)
MOTOR
Upper bushings
NBR rubber
MOTOR
Shaft pump side
stainless steel AISI 304 (LRS-LMS) stainless steel AISI 316 (LRX-LMX) Duplex (LRD-LMD)
MOTOR
Depht of immersion
max 350 m
MOTOR
Quantity of sand in the water
max 100 gr/m³
MOTOR
Asynchronous 2 poles motor
rewindable water cooled
MOTOR
Insulation class
Y (max 30 °C) - PPC winding type;
F (max 50 °C) - PE2+PA or LPE winding type
MOTOR
Protection degree
IP68
MOTOR
No products to show here
LMS-LMX-LMD
SUBMERSIBLE MULTISTAGE CENTRIFUGAL PUMPS FOR WELLS
Submersible multistage centrifugal pumps for 6” and 8” wells. Check valve built into the delivery outlet. Pump flanges for coupling with motors are made according to NEMA standards. Most common applications are civil and agricultural. All components are made of stainless steel with lost wax Microfusion technology. The standard material is AISI 304 stainless steel, alternatively the following materials are available on request: AISI 316 Steel, Duplex steel, AISI 904L Steel. Bushing bearings and wear-rings made of sand abrasion-resistant rubber, reverse-Thrust ring in PTFE/ Graphite.
CONSTRUCTION FEATURES
Suction and delivery outlet
stainless steel AISI 304 (LMS)
stainless steel AISI 316 (LMX)
Duplex (LMD)
MOTOR
Valve
stainless steel AISI 304 (LMS)
stainless steel AISI 316 (LMX)
Duplex (LMD)
MOTOR
Impellers and
diffusers
stainless steel AISI 304 (LMS)
stainless steel AISI 316 (LMX)
Duplex (LMD)
MOTOR
Upper bushings
NBR rubber
MOTOR
Shaft pump side
stainless steel AISI 304 (LMS)
stainless steel AISI 316 (LMX)
Duplex (LMD)
MOTOR
Depht of immersion
max 350 m
MOTOR
Quantity of sand in the water
max 100 gr/m³
MOTOR
MOTOR
Asynchronous 2 poles motor
rewindable water cooled
MOTOR
Insulation class
Y (max 30 °C) - PPC winding type;
F (max 50 °C) - PE2+PA or LPE winding type
MOTOR
Protection degree
IP68
MOTOR
E14
SUBMERSIBLE MULTISTAGE CENTRIFUGAL PUMPS FOR 14" WELLS
Submersible multistage centrifugal pumps for 14" wells. Check valve built into the delivery outlet. Pump flange for coupling with motors are made according to NEMA standards. Most common applications are civil and agricultural. All components are made of stainless steel with lost wax Microfusion technology. The standard material is AISI 304 stainless steel, alternatively the following materials are available on request: AISI 316 Steel, Duplex steel, AISI 904L Steel. Bushing bearings and wear-rings made of sand abrasion-resistant rubber, reverse-Thrust ring in PTFE/ Graphite.
CONSTRUCTION FEATURES
See also:
Suction and delivery outlet
Duplex (ED)
Cast iron (E)
MOTOR
Valve
Duplex (ED)
Cast iron (E)
MOTOR
Impellers and
diffusers
Duplex (ED)
Cast iron (E)
MOTOR
Upper bushings
NBR rubber
MOTOR
Shaft pump side
stainless steel AISI 431
MOTOR
Depht of immersion
max 350 m
MOTOR
Quantity of sand in the water
max 100 gr/m³
MOTOR
Asynchronous 2 poles motor
rewindable water cooled
MOTOR
Insulation class
Y (max 30 °C) - PPC winding type;
F (max 50 °C) - PE2+PA or LPE winding type
MOTOR
Protection degree
IP68
MOTOR
MOTOR