top of page

Foras JA 300 is a centrifugal electric water pump suitable for a range of domestic and residential use.

 

With the FORAS pump JA300, you can be sure that your water is being pumped in the most efficient way possible. This centrifugal self-priming pump, particularly suitable for constructing small and medium-sized pressurization systems. Characterized by a considerable ratio between performance and required to be output, they are suitable for domestic use, for example:
✔ for water transfer in home and flat building;
✔ rainwater harvesting in garden; 
✔ for irrigating orchards and irrigation for agriculture; 
✔ for auxiliary boiler plants;
✔ for drawing water from tanks; 
✔ for all those other situations where air or gas may be present in the pumped water.

Suitable for use with clean water that does not contain abrasive particles and with liquids that are not chemically aggressive towards the materials of which the pump is made.
In addition to its great performance, the JA300 is also very easy to use. It has a very simple design, making it easy to use and maintain. 

 

⚠ The installation must be carried out in well-ventilated closed rooms or in any case protected from the weather.

 

CONSTRUCTION FEATURES:
P2: 2.2 kW
Q max: 8.4 [m3/h]
H max: 64.5 [m]

 

About JA-series (150-300).

 

ADVANTAGES
Self-priming capability.
The pressure generated is greater (for the same impeller size and speed) than open impeller centrifugal pumps. 
Relatively high efficiency of such pumps.
Not a complicated pump design. Due to this, the repair and maintenance of these models is cheaper.
When connected to autoclave tanks, an automatic pressurisation system comes.

 

DISADVANTAGES
The disadvantage of such pumps is the sensitivity when pumping water containing solid particles and sand. This leads to a drop in pressure, efficiency and rapid wear of the internal elements of the device.

JA300 - Centrifugal Pump (64.5 m, 140 l/min, 230 V) for residential and domestic

€502.00Price
Excluding VAT |

DISCOUNT 25% straight from Factory

  • Construction Features  Option 
    Pump body cast iron
    Motor bracket cast iron
    Impeller noryl® or brass
    Mechanical seal ceramic-graphite 
    Motor shaft stainless stell AISI 304 hydraulic side
    Liquid temperature 0 - 50 °C
    Operating pressure max 8 bar
    Voltage 230 Volts
    Horsepower 3 H
    Flow rate 140 Litres Per Minute (8.4 m³/h)
    Rated current 10.3 A

     

    Motor Option 
    2 poles induction motor

    1~ 230V-50Hz  

    (with thermal protection)

    Insulation class F
    Protection degree IP44

     

    Product Dimensions 60 x 22 x 10.5 cm
    Item Weight 31.5 kgs
    Manufacturer PENTAX INDUSTRIES S.P.A. (Italy)

Related Products

bottom of page