Foras JXF 146 is a centrifugal electric water pump suitable for Home Gardening and for domestic use.
With the FORAS JXF146, you can be sure that your water is being pumped in the most efficient way possible. This self-priming pump, particularly suitable for constructing small and medium-sized pressurisation systems. Characterized by a considerable ratio between performance and required to be output, they are suitable for domestic use, for example:
✔ for water transfer;
✔ garden irrigation systems and rainwater harvesting;
✔ in irrigation complexes for agriculture;
✔ for auxiliary boiler plants;
✔ for irrigating orchards;
✔ for drawing water from tanks;
✔ for all those other situations where air or gas may be present in the pumped water.
In addition to its great performance, the JXF146 is also very easy to use. It has a very simple design, with only a single control valve, making it easy to use and maintain.
Suitable for use with clean water that does not contain abrasive particles and with liquids that are not chemically aggressive towards the materials of which the pump is made.
⚠ The installation must be carried out in well-ventilated closed rooms or in any case protected from the weather.
CONSTRUCTION FEATURES:
P2: 1.1 kW
Q max: 3.8 [m3/h]
H max: 60 [m]
About JXF-series
✅ADVANTAGES
Self-priming capability.
The pressure generated is greater (for the same impeller size and speed) than open impeller centrifugal pumps. Relatively high efficiency of such pumps.
Not a complicated pump design. Due to this, the repair and maintenance of these models is cheaper.
Independence from the pressure in the water supply at the inlet to the pump.
Ability to pump liquids saturated with gases.
❌DISADVANTAGES
The disadvantage of such pumps is the sensitivity when pumping water containing solid particles and sand, as this leads to a drop in pressure, efficiency and rapid wear of the internal elements of the device.
JXF146 - Centrifugal Electric Pump (60 m, 63 l/min, 230V) for garden and home
DISCOUNT 25% straight from Factory
Construction Features Option Pump body stainless steel AISI 304 Motor bracket aluminium Impeller noryl® Mechanical seal ceramic-graphite Motor shaft stainless steel AISI 416 Liquid temperature 0 - 50 °C Operating pressure max 6 bar Voltage 230 Volts Horsepower 1.5 H Flow rate 63 Litres Per Minute (3.8 m³/h) Rated current 6.0 A Motor Option 2 poles induction motor 1~ 230V-50Hz Insulation class F Protection degree IP44 Product Dimensions 41 x 17.5 x 21.5 cm Item Weight 11. 5 kgs Manufacturer PENTAX INDUSTRIES S.P.A. (Italy)