Electronic Control Panels
Electromechanical Panels
Inverters Panels
Pressure Controllers
Electronic Flow Control
Monitoring & Protection
ELECTRONIC FLOW CONTROL
HIDROMATIC H2
• Complete replacement of the traditional water system set consisting of pressure switch and pressure tank
• Control the starting of the electric pump after a pressure decrease (taps opening) and stopping when the fluid flow interrupt at the maximum pressure level of the electric pumps (taps closing)
• Protection against dry running
• Starting pressure adjustable during the installation
• Standard 1”M hydraulic connections
• Installation in any position - both vertical and horizontal, according to the flow direction
• Easily replaceable electronic printed circuit board • No need of maintenance
HIDROTANK H1
• Automatic start and stop operations of single-phases electric pumps up to 2 HP
• Replacement of the traditional water system set consisting on pressure switch and pressure tank
• Control the starting of the electric pump after a pressure decrease (taps opening) and stopping when the fluid flow interrupt at the maximum pressure level of the electric pumps (taps closing)
• Protection against dry running
• Starting pressure adjustable during the installation
• Standard 1”M hydraulic connections
• Installation in any position-both vertical and horizontal - according to the flow direction
• Easily replaceable electronic printed circuit board.
• No need of maintenance
• Thanks to the 0,4 lt. tank, it protects from the frequent start-stop required by small request of water and from any losses into the system
• Protection of the electronic board thanks to the new watertight compartment
• Protection from water-hammer
• New design and new concept
• Built in 0,4 lt. tank
• Built in pressure gauge
• Watertight electronic part
VARIABLE SPEED DRIVE
EPIC
EPIC is a device for the control and protection of pumping systems based on the variation of the input frequency of the pump. It controls the operation of the pump in order to maintain constant pressure at various conditions of use.
IPFC
It's a frequency changer (inverter); specifically studied for control and protection of electric pumps. Connected to any electric pumps regulates the motor speed in order to manage the pumps performance in relation to the operating conditions and requests of the system. Consists in compact electronic units equipped with microprocessor contained in an aluminium structure that grants compactness, cooling ease, lightness and versatility.
SPD
Pressure Transducer
TYPE
Output signal
Input voltage
Working pressure
Max. pressure
SPD
4… 20 mA
9… 28 V
0 - 25 bar
32 bar
MOTOR
PROTECTION/CONTROL PANEL
PML - PMC
• Power supply 1x230V-50/60Hz
• Electrical switch
• Run capacitor
• Externally resettable thermal relay
• Illuminated 0-1 main switch
• IP55 rated thermoplastic enclosure
• Outputs with cable gland
PMLD
• Power supply 1x230V-50/60Hz
• Electrical switch
• Run + start capacitor with disjunctor
• Externally resettable thermal relay
• Green illuminated main switch
• IP55 rated thermoplastic enclosure
• Outputs with cable gland
PT
• Power supply 3x400V-50/60Hz
• ON/OFF switch
• Protective device with thermal relay for motor overload or phase failure
• Thermoplastic enclosure
• IP55 protection level
EQSM
Electronic control panel for 1-2-3 pumps with direct start-up
CAPACITOR FOR EQSM
QST
Star/delta control panel for 1 three-phase pump
• Power supply 3x400V-50/60Hz
• 24V transformer for auxiliary circuit
• Low voltage inputs and circuit
• Blue mains supply LED
• Green motor running LED
• Red motor overload alarm LED
• Star/delta line contactors in AC3
• Auxiliary and motor protective devices with fuses
• Main door interlock switch disconnector
• ABS box up to 11kW, metal box from 15kW
Q2ST
Star/delta control panel for 2 three-phase pumps
• Power supply 3x400V-50/60Hz
• 24V transformer for auxiliary circuit
• Low voltage inputs and circuits
• Blue mains supply LED
• Green motor running LED
• Red motor overload alarm LED
• Star/delta line contactors in AC3
• Auxiliary and motor protective devices with fuses
• Main door interlock switch disconnector
• Metal box (whole range)
QSS
Soft start control panel for 1 three-phase pump
• Power supply 3x400V-50/60Hz
• Blue mains supply LED
• Green motor running LED
• Red motor overload alarm LED
• NA input for start control
• Auxiliary motor protective devices with fuse
• Main door interlock switch disconnector
• Forced ventilation kit
• IP54 rated metal box
• Ambient temperature -5 ÷ +40°C
QRS
Control panel with impedance start for 1 three-phase pump
• Power supply 3x400V-50/60Hz
• Blue mains supply LED
• Green motor running LED
• Red motor overload alarm LED
• NA input for start control
• Stator reactance with 4 starts/hour, 2 of which are consecutive
• Adjustable reactance timer
• Line and impedance starter contactors in AC3
• Main door interlock switch disconnector
• Ambient temperature -5 ÷ +40°C
TANKS
TANK
Interchangeable membrane expansion tanks
Interchangeable membrane expansion tanks; the pre-charge pressure in the tank guarantees a water reserve but also reduces the number of startups of the connected pump; the membranes are certified for use with foodstuffs; they may be in EPDM or butyl depending on the model.
CONSTRUCTION CHARACTERISTICS
• Flanges in galvanized steel or AISI 304 stainless steel.
• Tanks in carbon steel coated with powder paint or in AISI 304 stainless steel.
• Pre-charge valve with protective cover.
TANK AISI 304
Interchangeable membrane expansion tanks
Interchangeable membrane expansion tanks; the pre-charge pressure in the tank guarantees a water reserve but also reduces the number of startups of the connected pump; the membranes are certified for use with foodstuffs; they may be in EPDM or butyl depending on the model.
CONSTRUCTION CHARACTERISTICS
• Flanges in galvanized steel or AISI 304 stainless steel.
• Tanks in carbon steel coated with powder paint or in AISI 304 stainless steel.
• Pre-charge valve with protective cover.
Available products
MEMBRANES
PRESSURE SWITCH
Pressure gauges are essential instruments employed for the measurement and regulation of internal pressure within various systems. Particularly in industrial processes where precise pressure control is crucial.
PRESSURE GAUGE
Available products
A flexible hose is crafted from a resilient material capable of bending or twisting without sustaining damage, providing durability and adaptability. Water pump flexible hoses are specifically designed for efficient fluid dispensing purposes.
FLEXIBLE HOSE
The connectors enable a water tank to be connected to a pump without any loss of water.
CONNECTORS
The float switch is a versatile accessory used for controlling devices that rely on liquid level in tanks, such as pumps, regulators, and solenoid valves. It is compatible with most pump models, providing added convenience and flexibility.
FLOAT SWITCH
Valves on a pump help to regulate the pressure within a pump and prevent possible breakage. They control the flow of liquid through a pump.
VALVES
2 PUMPS BOOSTERSET MANIFOLD
PILOT integrated protection devices provide reliable protection for electric motors and pumps. The device monitors the operating current, the supply voltage value and prevents the pump from running without water.
PILOT
The AVIATOR, available as an accessory for the PILOT 118, is equipped with special contacts that allow it to be mounted directly on the power board of the PILOT 118. The starting capacitor provided by the AVIATOR board is connected in parallel with the running capacitor, but only during the starting phase. When the motor is running, the AVIATOR disconnects the starting capacitor.
AVIATOR BOARD with starting cap x Pilot 118
CABLE JOINT KIT FOR BOREHOLE MOTORS
Kit GC series for Industry
For a professionally made junction it is recommended to use the “Kit GC”, it has excellent requirements in terms of electric, mechanical and water resistance. This kit is composed of: crimp wire connectors in tinplated copper, thin wall heat-shrinkable tubing to cover the conductor of the cable, a strip of Scotch 2547, one of Scotchfil and medium wall heat-shrinkable tubing to cover the junction. It is recommended to seal the two end points of the sheath with a PVC textured insulating tape.
LEVEL PROBES
Single pole probe used for level control in wells or storage tanks. It made of an AISI 303 stainless steel electrode, a plastic (PPOX) holder and a cable gland. A seal ring and the tightening of the cable gland PG7 prevent water from entering the cable terminal connector and causing its oxidation.
• Cable connection: screw.
• The external cable diameter must be 2.5 to 6mm/Ø 0.1 to 0.24” to warrant perfect sealing.
• Maximum connection cable section: 2.5 mm²
• Maximum operating temperature: +60°C